Ross VRC-100 Betriebsanweisung PDF herunterladen (Seite 12)

2–2 • Overview NK-VRC User Guide (v03)

 The NK-IPS and PC with DashBoard are only required for setting up the configuration file, then sending this to

the device. However, you can use the NK Switchboard feature in DashBoard to control and monitor a routing

switcher system.

System Overview

A routing switcher system may use distributed control across the Internet, a LAN, or a VPN. The routing switcher

system shown in Figure 2.2 has been simplified. The NK-VRC enables you to map physical inputs and outputs

across multiple router levels to a virtual source or destination. For example, in Figure 2.2, Camera 1 provides

inputs to the SDI router level and the AES/EBU router level. If you map these two inputs to the same virtual source

(call this Camera 1), you can switch both levels with a single switch request. Without virtual routing, this can be

achieved with breakaways, but only if all routers have their inputs and outputs mapped 1:1. This is a simple

example of virtual routing. You can build up a complex map of several different physical devices that become one

virtual device. When a switch request is made for a virtual device, all the physical devices that are mapped to the

virtual device are switched.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Keine Kommentare

Ross VRC-100 Betriebsanweisung Seite 12